A Renaissance Lesson

With Renaissance Calling published, I wanted to take a moment to write down a lesson or four, to help anyone reading this who is thinking of publishing, and to remind myself down the line of mistakes I made. Renaissance Calling is my first book, so I’m not surprised I made some errors. With Book 2, I’m going to get these right.

Taking notes.
  1. Proofreading versus Editing

My editor was a huge help in prepping Renaissance Calling for publishing. She helped me refine my writing voice, clarify my story, and improve the general quality of the writing flow. I’m thankful she’s agreed to stick around for Book 2. But as it turns out, neither of us are proofreaders; we get into the flow of the story without looking at the details. So when several people who backer Renaissance Calling came to me with issues, I cringed.

Despite our best efforts, a number of small errors made it through to the first printing. Some of them were simple things (example: ‘while he attached’, instead of ‘attacked’). Others were a bit ‘how did I miss that’ (example: Horace spelled Horus on several occasions). One was downright ‘I didn’t know that was a thing’ (the single quotation marks would switch between straight and curly, sometimes on the same page).

A bit embarrassing, but a lot of books, even best sellers, have small errors. I’ve still gotten overwhelmingly positive responses to the story, even from people who handed me lists of corrections. So I’ve made the changes and I’m replacing the documents for future printings and eBooks. I’d like to say no one will find anymore, but I’m only human.

Lesson Learned: I need to spend more time and effort on proofreading.

How: A couple of things I can do.

  • I found a few mistakes when I was practicing reading out loud for my launch party, so I have made reading out loud part of my revision process.
  • A number of the detail-oriented people who handed me lists are willing to proofread future books, which will also help.
  • I’ve made some notes about common errors I made, and will endeavor to account for them in future projects.
  1. Publishing Date

The Kickstarter campaign finished in early November, and I had a tentative publishing date of February 10th (the main character’s birthday). All I had to do was write a Backer Book, finish editing Renaissance Calling, get ISBN’s and Barcodes, get final covers from my cover artist, and load all the documents to the printers. I could do all that in three months, right?

Well, not so fast. The Backer Book turned into a bigger endeavor than I thought it would, finishing at twice as long as I planned. The cover was some back and forth due to differences in RBG and CMYK formats.  And it took a lot more time and money to proof test prints of my book than I thought it would (details in No. 4 below).

The date was pushed back to March 8th, then April 8th. As I wrote about before, I got accidentally published on Amazon when I forgot to change the publishing date on one of the publishing sites. This was a bit of a relief, as I no longer had to feel rushed about getting my stuff done and out there.

Lesson Learned: I need to set a publishing date far enough out that I can get everything done.

How: As I’m scheduling my next book, I’m considering how long it took me to get Renaissance Calling into print and adjusting for differences in the book size (I’m anticipating Book 2 to be noticeably longer). My goal is to have everything done, proofed and printed two weeks before publishing.

  1. Figure out prices before committing

A minor error that I should have foreseen, but I assumed the costs of my books were going to be $12 for paperback and $16 for hardcover. I don’t know how I came to those numbers, but I was pretty certain of that going in. So much so that I had the original barcode for the paperback made with $12 on it.

Turns out, however, that after printing and distribution costs (particularly for the hardcover), sticking with those princes was not feasible. If I had, I’d be making less than a dollar on the paperback, and I’d be losing money on the hard cover. I had to raise the price for both formats.

Not a huge deal, except the first round of paperbacks got printed with the price still listed at $12. That’s been fixed and the correct price will displayed on future printings.

Lesson Learned: Do all the math before you set something in stone.

How: Not difficult; most printers and distributors have calculators to help you figure out the math. Take advantage of the tools. Work it out before you commit.

  1. Proofing and Printing

(Note: Proofing in this section was not for content or spelling, but for formatting errors when converting from Word to PDF and PDF to print.)

Proofing printed copies of Renaissance Calling turned out to take longer, and be more expensive, than I anticipated. A lot of this was due to this being my first book, and not being experienced enough to understand what I was doing.

With Createspace, the process is pretty easy. Once a PDF of the internal documents is loaded (and their website can convert Word docs to PDF), it can be proofed through an online viewer that organizes it as if it was a book. I should have spent more time reviewing it online, instead of ordering a proof copy and finding formatting errors in that.

Ingram Spark is much more complex. The files being uploaded have to be corrected by you, the author, which can result in some issues when the formatting is off. Issues that are a pain in the ass to correct, since Spark is so particular. Luckily there is an option to ignore the issues and continue, so when you’re black and white PDF is being kicked back as having color (Yeah, I never figured out what this was), you can tell it to continue with a little waiver. They do provide a PDF to proof, but not the snazzy online program Createspace does.

In both cases, it took a bit longer to get physical proofs than I expected. It also cost a bit more, since I had missed that Ingram Spark requires $50 to set up a file and $25 to correct. With two books set up at Ingram (hardcover and backer book), one correction each, and two proof copies of all three books, I spent well over $200 just proofing. If I had been on the ball, I could have saved about $100.

Lesson Learned: Give enough time to proof and print thoroughly, and be careful before you print off a copy.

How: There are a number of things I can do for this one.

  • Both: Convert the document to PDF and check thoroughly. A lot of errors come from this step, so checking the PDF should catch most of them. Check it several times.
  • Createspace: Proof the online program several times before confirming.
  • Ingram Spark: Proof the provided PDF several times before confirming.

Conclusion

As this was my first novel, I’m not surprised I made a few errors. But the point of an error is to learn a lesson. By writing these down now, I am going to remember them when I get back into the publishing process, which should be sometime next year.

If you’ve got any of your own tips, feel free to share. Thanks!

-Michael